s Cone Crusher

s cone crusher Comparing with other kinds crusher, s cone crusher (CS Series s cone crusher) with high-efficiency and optimization of cavity-type has excellences for fine crushing, high roductions and low maintenance. The long force arm designed into the s cone crusher provides greater crushing force.
s cone crushers (2ft, 3ft, 4 1/4ft, 5 1/2 feet standard and short head cone crusher) with capacity 50-400, 500-1300tph are used for quarry, mining, sand making industry.
s cone crusher application
s cone crusher is widely applied in cement making industry, building, sand making, metallurgical industry, etc. The cone crusher from China is suitable for both metallic minerals and non-metallic minerals, such as iron ore, copper ore, bauxite ore, manganese ore, nickel ore, gold ore, granite, basalt, limestone, quartzite, sandstone, river stone, cobble stone, pebble etc.
s cone crusher main features and benefits
1. Higher capacity and less wear costs.
2. Dry oil seal system. SBM s cone crusher has special seal structure, which extends the lubricants' replacement cycle and the life of spare parts.
3. Special material is adopted on the key components of SBM s cone crusher to support large crush power.
4. Wide range of application suitability.
5. Easy to maintain, reduce the downtime and maintenance costs.
s cone crusher main parts
s cone crusher machine mainly consists of frame, concaves assembly, mantle assembly, spring, bowl support, and transmission. Auxiliary parts includes electrical system, lubrication system, and hydraulic cleaning system.
We also offer spare parts and original wear parts related to the s cone crusher.
s cone crusher working principle
s cone crusher materials by the working surface between the movable cone and fixed cone. The movable cone is supported by spherical bearing and fixed on a hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are driven by the eccentric shaft sleeve together. The eccentric shaft sleeve is driven by horizontal shaft and fimbriated gear, and the wheel of the conveyor belt is driven by motor through v-belts. The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can be ascended or descended by adjusting setting to adjust the width of discharge hole; consequently the output size is determined.
Model Cavity Recommended Minimum Discharge Setting A(mm) Feed Opening With Min.Recommended Discharge Setting A(mm) Capacities In Tons Per Hour Passing Through The Crusher At Indicated Discharge Power(KW)
Opening Side”B” Closed Side”B”
36” (3’) Fine 9 102 83 45-93 75
Coarse 13 175 159 59-165
Extra Coarse 25 178 163 129-198
51" ( 4.25' ) Fine 13 137 109 106-183 185
Medium 16 210 188 132-304
Coarse 19 241 216 171-349
Extra Coarse 25 259 238 230-450
66" ( 5.5' ) Fine 15 209 188 180-324 240
Medium 22 241 213 252-437
Coarse 25 269 241 299-634
Extra Coarse 38 368 331 431-680
84" ( 7' ) Fine 19 278 253 381-1028 400
Medium 25 334 303 605-1284
Coarse 31 369 334 786-1450
Extra Coarse 38 460 425 886-1637

Specification Chart In Open Circuit (SHORT HEAD):
Model Cavity Recommended Minimum Discharge Setting A(mm) Feed Opening With Min.Recommended Discharge Setting A(mm) Capacities In Tons Per Hour Passing Through The Crusher At Indicated Discharge Power(KW)
Opening Side”B” Closed Side”B”
36” (3’) Fine 3 41 13 27-91 75
Coarse 3 60 33 28-100
Extra Coarse 6 76 51 58-127
51" ( 4.25' ) Fine 3 64 29 36-160 155
Medium 6 89 54 84-164
Coarse 8 105 70 110-224
Extra Coarse 16 133 98 209-236
66" ( 5.5' ) Fine 5 70 35 90-207 240
Medium 6 89 54 137-280
Coarse 10 133 98 190-330
Extra Coarse 13 133 117 253-337
84" ( 7' ) Fine 5 105 51 189-509 400
Medium 10 133 95 352-617
Coarse 13 178 127 450-687
Extra Coarse 16 203 152 505-727
If you want any crusher ,or have any question about our crushers and grinding mills,you can contact us by :
1,Tel: 0086-21-58386256 & 0086-21-58386258
2,E-mail: sales@zenithcrusher.net
3,Fax: 0086-21-58385887
4,have a chat with the online staff(around the clock)
5,send us an inquiry in below form,we'll reply as soon as possible